Multi-room mode
The K1 AV can supply sound to a second room (e.g. your office or the kitchen -
The K1 AV can be
If the K1 AV picks up a volume command via the external remote control receiver, it will either control the volume of the loudspeaker group B (VOL A/B,
For the adjacent room the following limitations apply:
•It is only possible to listen to the same source as the one selected in the main room.
•The difference in volume is limited to 38.75 dB.
In all other respects the use of the system in the main room is not affected by its use in the adjacent room.
The method of connecting and wiring the additional components for
Amplifier menu
The Amplifier menu groups together the Balance and Tone control functions of the K1 AV.
The Amplifier menu is opened with a brief press on the yellow button on the F6 remote control handset. The K1 AV’s integral screen now displays the first menu point ‘BAL’ (= Balance). You can now use the and
buttons on the remote control handset to adjust the balance to left or right. The current value is displayed on the screen.
Press the and buttons to call up the other menu points; the set values are changed as described above.
An overview of the Amplifier menu and its adjustment facilities is shown in the picture on the next page. The individual menu points and their adjustment facilities are described in detail in the following section.
Basic settings for the amplifier section of the K1 AV, such as Loudspeaker configuration, Bass management etc. are adjusted in the Amplifier Setup menu, which is described in
detail in the chapter 'Basic settings,
Installation, Using the K1 AV for the first time'.
The Amplifier Setup menu is opened with a long press on the yellow button on the F6 remote control handset.
11
