T+A Elektroakustik K1 AV user manual Time RDS, 10-25 CLK

TIME RDS

Amplifier Setup Menu point Time (set automatically by RDS)

Explanation:

In this menu point you can determine the method of setting the internal clock.

Operation:

The screen shows the current setting.

MAN	The time can be set manually in the menu point ‘Set clock’.
RDS	The time is read automatically from the RDS signal of the received radio station;
	the machine accepts this time setting. This only works if good RDS reception is
	available.

 Ifmanuallyyou select. the latter option, you cannot change the time of day

The manual setting option should always be selected if you live in an area where no stations with RDS (Radio Data System) can be picked up.

Amplifier Setup Menu point Set clock (CLK)

Explanation:

The K1 AV’s internal clock makes it possible to switch the machine on automatically at a pre-programmed time. If this is to work properly, the clock must first be set to the correct time of day.

Operation:

The screen displays the currently set time, e.g.: '10-25 CLK'.

As soon as you alter this time using the or buttons, the word 'CLK' starts to flash.

The time of day changes at three different rates as long as the buttons are held pressed in.

You have to press the button in order to accept the time you have set. For about one second the screen then displays the new time of day and the word ‘SET’, e.g. ‘15-30 SET’.

If the menu control buttons (, , , , or ) are not operated for a period of about ten seconds - or, after setting the clock, for 90 seconds - the amplifier interrupts the menu (Timeout) and reverts to the normal screen display.

 Manualpoint ‘Timetime’. adjustment is only possible if you have selected ‘MAN’ in the menu

39