Sony KV 27FS320 manual Other Information, Troubleshooting, General

Other Information

Troubleshooting

If you have a problem with your TV, try the suggestions below. If the problem persists, see “Contacting Sony” at the end of this section.

General

Problem	Possible Remedies
I want to reset the TV	❏ Turn on the TV. While holding down the RESET button on the
to the factory	remote control, press the POWER button on the TV front panel.
settings	The TV will turn itself off, then back on again. Release the
	RESET button.
The TV is dirty	❏ Clean the TV with a soft dry cloth. Never use strong solvents
	such as thinner or benzine, which might damage the finish of
	the cabinet.
I lost the parental	❏ In the password screen, enter the following master password:
control password	4357. After using the master password, you must create a new
	password. You cannot use the master to unlock currently
	blocked channels.
There is a black box	❏ You have selected a text option in the Setup menu (page 50) and
on the screen	no text is available. To turn off this feature, select Off in the
	Caption Vision option. If you were trying to select closed
	captioning, select CC1-4 instead of Text1-4.
There was a blackout	❏ Press the POWER button on your remote control or on the TV
or power outage, and	front panel.
now the TV won't turn
on and the timer LED
is flashing
The digital cable box	❏ If you are connecting a VCR and digital cable box using a
does not work	splitter, as described in page 13, you must use a special bi-
	directional splitter (5-900 Mhz mininum) that is designed to
	work with your digital cable box.

Other Information

I can’t connect the DVD player using component video outputs (Y, PB, PR)

❏You must set up your DVD player before you can connect it using component video outputs (Y, PB, PR). Disconnect the DVD player and set it up, referring to the DVD manual for instructions. Then, connect it to the TV again following the instructions in “Connecting a DVD Player using Component Video“ on page 18.

51