6
Operating Instructions
qd POWER
buttons
Press to turn on and off the TV and other audio/video
equipment you have programmed into the remote control.
For instructions, see “Programming the Remote Control”
on page49.
qf FUNCTION
buttons
Press to select the equipment (TV, VCR/DVD, SAT/
CABLE) that you want to operate with the remote control.
The indicator (LED) lights up momentarily when pushed
to show which device the remote control is ope rating.
qg TV/VIDEO Press to cycle through available video inputs.
qh ANT
(antenna)
Press to change between the VHF/UHF input to the AUX
input, press again to switch back.
qj and
ENTER
Press to change channels directly. The channel changes
after 2 seconds.
qk See “Using Picture in Picture (PIP) with Remote Y182” on
page26 for details.
ql See “Using Picture in Picture (PIP) with Remote Y182” on
page26 for details.
w; GUIDE Press to display the program guide of your satellite
antenna.
wa CH (channel) Press to change channels. To scan rapidly through the
channels, press and hold down the CH+ or CH- button.
ws RESET Press to return to the factory settings while in an on-screen
menu.
wd Use to switch control for connected video equipment. You
can program one video source for each switch position.
For details, see “Programming the Remote Control” on
page49.
✍If you lose your remote control, see page 54.
Button Description
0 9
AV 1 2 3 DVD