36
Operating Instructions
MTS
Multi-Channel
TV Sound
Use the joystick to scroll up or down to select from one of the following
options, then press to select it.
Stereo: Select when viewing a broadcast in stereo.
Auto SAP: Select to have the TV automatically switch to a Second Audio
Program (SAP) when a signal is received.
Mono: Select to reduce noise in areas of poor reception.
Speaker
Custom
selection of
audio output
source
Use the joystick to scroll up or down to select from one of the following
options, then press to select it.
On: Select to listen to the sound from the TV speakers with or
without a separate stereo system.
Off: Select to turn off the TV speakers and listen to the TV’s sound
only through external audio system speakers.
Audio Out
Use to control
the TV’s volume
through a stereo
Use the joystick to scroll up or down to select from one of the following
options, then press to select it.
Audio Out settings can only be set when speakers are set to Off.
Variab le: Adjust the volume through your TV.
Fixed: Adjust the TV volume through a connected stereo.
✍If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output
sound, change your Audio MTS setting to Stereo or Mono.
✍Press button on the remote control for direct access to the MTS settings (Stereo, Auto SAP,
Mono).
✍Audio Out settings can only be set when Speaker is set to Off.