16

Operating Instructions

Connecting a TV and Satellite Receiver

1Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.
You can use the button to switch between the VHF/UHF and VIDEO inputs.
For better picture quality, use S VIDEO instead of the yellow audio/video cable. S VIDEO does not
provide sound; you still must connect the audio cables.
134
Satellite Receiver
Satellite
antenna
cable
1
2
3
From
cable/
antenna
Video (yellow)
Audio R (red)
Audio L (white)
Rear of TV