2Connect the FM/AM antennas.

Set up the AM loop antenna, then connect it.

Extend the FM wire antenna horizontally.

AM loop antenna

ANTENNA

 

 

FM

 

750HM

 

AM

Step2: Settingthe time

You must set the time beforehand to use the timer function.

2,4

1,3,5

3Set VOLTAGE SELECTOR to the position of your local power line voltage (For LBT-G1 only).

VOLTAGE SELECTOR

110V-120V220V-240V

4Connect the AC power cord to a wall outlet.

If the plug of this unit does not fit your wall outlet, detach the supplied adapter from the plug (Except for North American models).

1 Press CLOCK SET for a few seconds, when the power is off. “– – :–” appears.

2 Press )±or -0and set the hour. “A” indicates AM and “P” indicates PM.

Inserting two R03 (size AAA) batteries into the remote

Tip

With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.

3 Press CLOCK SET.

The minute indication flashes.

4 Press )±or -0and set

the minute.

continued

5

LBT-G1/LBT-G1300. 3-859-546-53. EN

Page 5
Image 5
Sony LBT-G1300 manual Settingthe time, Connect the FM/AM antennas, Connect the AC power cord to a wall outlet, Tip