
Listening to the radio (continued)
1 Press TUNER/BAND repeatedly until the desired band appears in the display.
Each time you press this button, the band changes as follows:
FM y AM
2 Press TUNING MODE repeatedly until “PRESET” appears in the display.
MANUAL t AUTO t PRESET
t
3 Press TUNING +/– (or PRESET +/– on the remote) to tune in the desired preset station.
Wide display | Frequency |
Preset number* | |
| MHz |
| DOLBY NR |
| OFF |
| VOLUME |
ALL DISC S |
|
| PRESET |
Normal display |
|
Preset number* | Frequency |
| MHz |
| DOLBY NR |
| OFF |
| VOLUME |
ALL DISC S | PRESET |
* When only one station is preset, "ONE PRESET" appears in the display.
To | Do this |
Turn off the radio | Press ?/1. |
|
|
Adjust the volume | Turn VOLUME (or press |
| VOL +/– on the remote). |
|
|
To listen to non-preset radio stations
Press TUNING MODE repeatedly in step 2 until “MANUAL” appears, then press TUNING +/– to tune in the desired station.
Tips
•Pressing TUNER/BAND while the system power is off automatically turns on the system and tunes in the last received station (One Touch Play).
One Touch Play is not available in Power Saving mode.
•You can switch from another source to the radio by pressing TUNER/BAND (Automatic Source Selection).
•If an FM program is noisy, press STEREO/ MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press this button again to restore the stereo effect.
•To improve broadcast reception, move the supplied antennas.
14