
2 Press TUNING MODE repeatedly until “AUTO” appears in the display.
3 Press TUNING
The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear.
Wide display
MHz
DOLBY NR
OFF
VOLUME
ALL DISC S
TUNED
AUTO
STEREO
Normal display
MHz
DOLBY NR
OFF
VOLUME
TUNED
STEREO AUTO
ALL DISC S
4 Press TUNER MEMORY.
The next available preset number flashes in the display. The stations are stored from preset number 1.
Wide display
DOLBY NR
OFF
VOLUME
ALL DISC S
TUNED
AUTO
STEREO
Normal display
MHz
DOLBY NR
OFF
VOLUME
TUNED
STEREO AUTO
ALL DISC S
5 Press ENTER/NEXT.
The station is stored.
6 Repeat steps 1 through 5 to store other stations.
Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press TUNING +/– to tune in a station.
To store another station on an existing preset numberStart over from step 1. After step 4, press TUNING +/– to select the preset number on which you want to store the station.
You can add a new preset number after the last preset number.
To erase a preset number1Press and hold TUNER MEMORY until a preset number flashes in the display.
2Press TUNING +/– to select the preset number you want to erase. Select “ALL ERASE” to erase all preset numbers.
3Press ENTER/NEXT.
When you erase a preset number, all the following preset numbers shift up and reduce by one.
To change the AM tuning interval(Except for European and Middle Eastern models)The AM tuning interval is
Note
The preset stations are canceled when you disconnect the power cord or if a power failure occurs for more than half a day.
9