
Connecting audio components (continued)
Connecting a mixer (for European, North American, and Mexican models only)
You can connect a mixer to the DJ MIX jacks on the rear panel of the unit.
To the outputs | To the inputs |
of the mixer | of the mixer |
Note
Replace the jumpers when the mixer is not in use. Otherwise, no sound will come from the unit. Be sure to connect the jumpers from the RETURN jack to the SEND jack of the unit.
Two jumpers are preinstalled connecting the DJ MIX RETURN and SEND jacks.
ANTENNA
DJ MIX | FM 75 |
AM
RL
R L
IN PHONO
IN
OUT
AUDIO
IN
VIDEO
IN
OUT VIDEO
MD
VIDEO 1
1Remove the jumpers from the unit.
2Connect the SEND jack of the unit to the IN jack of the mixer with an optional cable.
3Connect the OUT jack of the mixer to the RETURN jack of the unit with an optional cable.
4Press FUNCTION repeatedly until “CD” appears.
You can also record the sound produced by the mixer onto a tape.
Connecting surround speakers (LBT-LX50 only)
You can connect optional surround speakers. Refer to the instructions included with your surround speakers for details.
To surround | To surround |
speaker (R) | speaker (L) |
Note
You need to connect both left and right surround speakers. Otherwise, the sound will not be heard.
42