
Step 2: Hooking up the system (continued)
2Connect the FM/AM antennas.
Set up the AM loop antenna, then connect it.
Jack type A
Extend the FM wire antenna horizontally.
AM loop antenna
FM | 75 |
| |
AM |
|
Jack type B
Extend the FM wire antenna horizontally.
AM loop antenna
C |
|
|
O |
| |
FM | AX | IAL |
| 75 |
AM
3If your system has a VOLTAGE SELECTOR on the rear panel, set it to the position of your local power line voltage.
VOLTAGE SELECTOR
| - |
230 | 240V |
120V | 220V |
4Connect the power cord to a wall outlet.
The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically stops.
If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter).
To connect optional AV components
See page 41.
To deactivate the demonstration
When you set the time (see “Step 3 Setting the time”), the demonstration is deactivated.
To activate/deactivate the demonstration again, press DISPLAY (for
6