Step 3: Setting the time (continued)

Tip

If you make a mistake, start over from step 1.

To change the time

The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following:

1Press c/CLOCK SET.

2Press TUNING +/– to select SET CLOCK.

3Press ENTER/NEXT.

4Perform steps 2 through 5 in the previous explanation.

Notes

You cannot set the time in Power Saving mode (LBT-LX50/LX30/LX7/LX5 only, see page 10).

The clock setting is canceled when you disconnect the power cord or if a power failure occurs.

Step 4: Presetting radio stations

You can preset the following number of stations:

20 for FM and 10 for AM

The bands you can select depend on the kind of tuner built into your system. Confirm the bands by pressing TUNER/BAND repeatedly.

?/1

(Power)1 3 5 4 2

1 Press TUNER/BAND repeatedly until the desired band appears in the display.

Each time you press this button, the band changes as follows:

FM y AM

8