Recording CDs by specifying the track order (continued)
7 Press PLAY MODE once.
The track is programmed. “STEP” and the programmed playing order appear, followed by the total playing time.
The last programmed track
DOLBY NR
OFF
DISC
PROGRAM
Total playing time
The last programmed track
DOLBY NR
OFF
DISC PROGRAM
Total playing time
8 Repeat steps 5 through 7 to program additional tracks to be recorded on side A.
Skip step 5 to select tracks from the same disc.
9 Press Pto insert a pause at the end of side A.
“P” appears in the display and the total playing time resets to “0.00” in the display.
10Repeat steps 5 through 7 to program the tracks to be recorded on side B.
Skip step 5 to select tracks from the same disc.
11Press CD SYNC.
Deck B stands by for recording, the CD player stands by for playback, and the indicator on the ·button (for the front side) lights up green.
12Press DIRECTION repeatedly to select Ato record on one side or
ß(or RELAY) to record on both sides.
13Press Pon deck B.
Recording starts.
To stop recording
Press pon deck B or on the CD player.
To check the order
Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears.
To cancel Program Edit
Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display.
Selecting the tape length automatically
— Tape Select Edit
You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing more than 20 tracks.
/After inserting a CD, press EDIT once so “EDIT” flashes.
The required tape length for the CD in the playing position appears, followed by the total playing time for sides A and B.
Note
You cannot use this function when Program Play mode has been set. After clearing the entire program (see “To clear the entire program” on page 21), follow the above procedure.
24