Sony Specifications, Tuner section, Amplifier section, CD player section, For the U.S. model, Tape player section, AUDIO POWER SPECIFICATIONS

Specifications

For the U.S. modelAUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

With 8 ohm loads, both channels driven, from 70 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from

250 milliwatts to rated output.

Amplifier section

Continuous RMS power output (LBT-D290/D590/D690/D990/G3300)

Canadian model:	100 + 100 watts
	(8 ohms at 1 kHz, 5%)
(LBT-XB3/XB3K/XB30)	70 + 70 watts
	(6 ohms at 1 kHz, 10%
	THD)
(LBT-XB4/XB4K)	80 + 80 watts
	(5 ohms at 1 kHz, 10%
	THD)
(LBT-XB600/XB6/XB6K)	100 + 100 watts
	(8 ohms at 1 kHz, 10%
	THD)

Peak music power output (LBT-XB3/XB3K/XB30) 1,000 watts

(LBT-XB4/XB4K) 1,200 watts (LBT-XB600/XB6/XB6K) 1,400 watts

Inputs

PHONO IN (phono jacks):

sensitivity 3 mV, impedance 47 kilohms

VIDEO (AUDIO) IN (phono jacks): sensitivity 250 mV, impedance 47 kilohms

MIX MIC (phone jack): sensitivity 1 mV, impedance 10 kilohms

Outputs

PHONES (stereo phone jack):

accepts headphones of 8 ohms or more

SPEAKER: (LBT-D290/D590/D690/D990/G3300/XB600/XB6/

XB6K)	accepts impedance of 8 to
	16 ohms.
(LBT-XB3/XB3K/XB30)	accepts impedance of 6 to
	16 ohms.
(LBT-XB4/XB4K)	accepts impedance of 5 to
	16 ohms.

SURROUND SPEAKER (LBT-D590/D690/D990/XB600/XB6/XB6K only)

accepts impedance of 16 ohms

CD player section

System	Compact disc and digital
	audio system
Laser	Semiconductor laser
	(λ = 780 nm)
	Emission
	duration: continuous
Laser output	Max. 44.6 ∝F*
	* This output is the value
	measured at a distance of
	200 mm from the
	objective lens surface on
	the Optical Pick-up Block
	with 7 mm aperture.
Wavelength	780 – 790 nm
Frequency response	2 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio	More than 90 dB
Dynamic range	More than 90 dB

Tape player section

Recording system	4-track 2-channel stereo
Frequency response (DOLBY NR OFF)
	60 – 13,000 Hz ( ±3 dB),
	using a Sony TYPE I
	cassette
	60 – 14,000 Hz ( ±3 dB),
	using a Sony TYPE II
	cassette
Wow and flutter	±0.15% W. Peak (IEC)
	0.1% W. RMS (NAB)
	±0.2% W. Peak (DIN)

Tuner section

FM stereo, FM/AM superheterodyne tuner

FM tuner section
Tuning range
North American model:	87.5 – 108.0 MHz
	(100 kHz step)
Other models:	87.5 – 108.0 MHz
	(50 kHz step)
Antenna	FM wire antenna
Antenna terminals	75 ohm unbalanced
Intermediate frequency	10.7 MHz
AM tuner section
Tuning range
North American model:	530 – 1,710 kHz
	(with the tuning interval
	set at 10 kHz)
	531 – 1,710 kHz
	(with the tuning interval
	set at 9 kHz)
Other models:	531 – 1,602 kHz
	(with the tuning interval
	set at 9 kHz)
	530 – 1,710 kHz
	(with the tuning interval
	set at 10 kHz)
Antenna	AM loop antenna,
	External antenna
	terminals
Intermediate frequency	450 kHz

40