Timer-recording radio programs (continued)
4 Set the time to start recording.
Press TUNING +/– to set the hour, then press ENTER/NEXT.
The minutes indication flashes.
DOLBY NR
OFF REC
ALL DISC S
DOLBY NR
RECOFF
ALL DISC S
Press TUNING +/– to set the minutes, then press ENTER/NEXT.
The hour indication flashes again.
5 Set the time to stop recording following the above procedure.
The start time, the stop time, the recording source, and the preset station appear in turn before the original display returns.
6 Insert a blank tape in deck B.
7 Turn off the system.
When recording starts, the volume level is set to the minimum.
To check the setting
1Press REC.
2“TIMER OFF” appears in the display.
3Press REC again.
To change the setting, start over from step 1.
To cancel the timer operation
1Press REC.
2“TIMER OFF” appears in the display.
Notes
•The system turns on 15 seconds before the preset time.
•If the system is on at the preset time, the recording will not be made.
•You cannot set the timer if the timer on and off times are the same.
•When you set the Sleep Timer, the Timer- recording will not start until the Sleep Timer turns off the system.
•You cannot activate the
•Recording starts from the front side.
36