Step 3: Presetting radio stations
You can preset up to 30 stations, 20 for FM and 10 for AM.
1 7 5 3 4,6 2
1 Press POWER (I/ufor
2 Press TUNER/BAND repeatedly until the band you want appears in the display.
Each time you press this button, the band changes as follows:
FM ˜AM
3 Press TUNING MODE repeatedly until “AUTO” appears in the display.
4 Press TUNING
The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear.
DOLBY NR
OFF
TUNED
STEREO AUTO
ALL DISC S
MHz
DOLBY NR |
|
OFF | AUTO |
TUNED
STEREO
ALL DISC S | MHz |
5 Press TUNER MEMORY.
A preset number flashes in the display.
DOLBY NR
OFF
TUNED
STEREO AUTO
ALL DISC S
DOLBY NR |
|
OFF | AUTO |
TUNED
STEREO
ALL DISC S
6 Press TUNING +/– to select the preset number you want.
DOLBY NR
OFF
TUNED
STEREO AUTO
ALL DISC S
DOLBY NR |
|
OFF | AUTO |
TUNED
STEREO
ALL DISC S
7 Press ENTER/NEXT.
The station is stored.
8 Repeat steps 2 through 7 to store other stations.
To tune in a station with a weak signalPress TUNING MODE repeatedly until “MANUAL” appears in step 3, then press TUNING +/– to tune in the station.
To change the preset numberStart over from step 1.
To change the AM tuning interval(Except for the Middle Eastern model)The AM tuning interval is
Note
The preset stations are canceled when you disconnect the power cord or if a power failure occurs for half a day.
7