2Connect the FM/AM antennas.

Inserting two size AA (R6)
batteries into the remote

Set up the AM loop antenna, then

 

connect it.

 

Extend the FM wire

 

antenna horizontally.

 

AM loop antenna

 

FM75

 

AM

 

3Set VOLTAGE SELECTOR to the position of your local power line voltage (except for North American, Malaysian, Mexican, and Australian models).

VOLTAGE SELECTOR

110-120V 220-240V

4Connect the power cord to a wall outlet.

The demonstration appears in the display.

If the plug on this unit does not fit your wall outlet, detach the supplied adapter from the plug (except for North and South American countries, Australia, and Malaysia).

5Deactivate the demonstration mode by pressing DISPLAY/DEMO while the system is off.

Tips

•With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.

•When you set the time, the demonstration is deactivated.

To activate the demonstration again, press DISPLAY/DEMO while the system is off.

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.

When carrying this system

Do the following to protect the CD mechanism.

1Press FUNCTION repeatedly until “CD” appears in the display.

2Hold down PLAY MODE and press POWER (I/ufor LBT-D990/XB30) to turn off the system.

5