Sony FST-ZX100D, FST-ZX100D, FST-ZX80D, LBT-ZX100D, LBT-ZX80D, MHC-GN1000D, LBT-ZX80D Setting the clock, 13US, Example, 4 Press ENTER, 6 Press ENTER, MHC-GN1000Donly, Started Getting, Speaker settings, 2 Press TIMER MENU, To adjust the clock

Example 3

Place the front speakers in one room and the surround speakers in another room. For details, see “Listening to the sound in another room” on page 58.

MHC-GN1000D only

Place the front speakers at an angle of 45 degrees from your listening position.

Unit	TV
Front	Front
speaker	speaker
(left)	(right)

	Center
	speaker
	Sub woofer
	45
Surround	Surround
speaker	speaker
(left)	(right)
	Listener

Notes

•Do not place the surround speakers on top of a TV. This may cause distortion of the colors in the TV screen.

•If you place the center speaker on the unit, be sure to place it at the front side of the unit.

•Place the subwoofer on solid floor where resonance is unlikely to occur so that a better bass reproduction could be obtained.

•Always place the subwoofer vertically, keeping it a few centimeters/inches away from the wall.

•If the subwoofer is placed in the center of a room, the bass could be extremely weakened. This is due to the influence of the standing wave of the room. If this happens, move the subwoofer away from the center of the room or eliminate the cause of the standing wave, by placing a bookshelf against the wall, etc.

Speaker settings

To enjoy DVD VIDEOs and other discs with multi-channel sound and Dolby surround effects, you need to adjust the speaker settings. For details, see “Setting the speakers” on page 44.

Setting the clock

1 Press ?/1 to turn on the system.2 Press TIMER MENU.

The hour indication flashes in the display.

3 Press V or v repeatedly to set the hour.4 Press ENTER.

The minute indication flashes in the display.

5 Press V or v repeatedly to set the minute.6 Press ENTER.

The clock starts functioning.

To adjust the clock

1Press TIMER MENU.

“PLAY SET?” flashes in the display.

2Press V or v repeatedly to select “CLOCK SET?”, then press ENTER.

The hour indication flashes in the display.

3Do the same procedures as step 3 to 6 above.

Notes

•The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

•You cannot set the clock in Power Saving Mode (page 66).

Started Getting

13US