Sony FST-ZX100D, FST-ZX100D, FST-ZX80D, LBT-ZX100D, LBT-ZX80D, MHC-GN1000D, LBT-ZX80D Loading a tape, Playing a tape, 50US, Load a tape, Other operations, 4 Press H (or nN on the unit), 2 Load a tape into Deck A or B

Load a tape.

Tape – Playback

Loading a tape

1 Push b (Z A) or B (B Z) on the unit according to its direction to open the selected deck.

Push here
to eject the	A
tape deck	t
	b

2 Load a tape into Deck A or B.

With the side you want to play back or record facing forward

3 Push the center of the tape lid to close the deck.

Playing a tape

You can use TYPE I (normal) tape.

1

2 Press FUNCTION +/– (or TAPE A/B on the unit) repeatedly to select “TAPE A” or “TAPE B”.

3 Press DIRECTION on the unit repeatedly to select “g” to play back one side, “j”1) to play back both sides or “RELAY”2) (Relay Play) to play back both decks in succession.

4 Press H (or nN on the unit).

The tape starts playing.

Press H (or nN on the unit) again to play back the reverse side.

Reverse

Front side side

indicator indicator

Tape presence indicator

1)The playback stops automatically after repeating the sequence five times.

2)Relay Play follows this cyclic sequence up to five times, then stops:

Deck A (front side) t Deck A (reverse side) t Deck B (front side) t Deck B (reverse side)

Other operations

To	Do this
Stop playback	Press x.
Pause playback	Press X. Press X again to resume
	playback.
Fast-forward or	Press m or M (or m or
rewind	M on the unit). To return to
	normal playback, press H
	(or nN on the unit).
Remove a tape	Push b (Z A) or B (B Z) on the
	unit according to its direction
	when playback is stopped.

Note

Do not push b (Z A) or B (B Z) on the unit while playing a tape, otherwise the tape could be damaged.

Tips

•When a tape is inserted, the corresponding presence indicator lights up in the display.

•If you press TAPE A/B on the unit while the system is turned off, the system turns on automatically and “TAPE A” or “TAPE B” is selected as the function except during Power Saving Mode.

•If you press H (or nN on the unit) when the TAPE A function is selected and there is no tape in Deck A, the system automatically switches to the TAPE B function when there is a tape in Deck B and vice versa. Then, playback will start.

50US