xLEVEL (FRONT)

You can adjust the level of the front speakers, center speaker and subwoofer as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment. The items that are set to “NONE” in “SIZE” cannot be selected.

LSet this between –6.0 dB and 0.0 dB

0.0 dB

in 1.0 dB increments.

 

 

RSet this between –6.0 dB and 0.0 dB

0.0 dB

in 1.0 dB increments.

 

 

CENTER

Set this between –6.0 dB and

0.0 dB

+6.0 dB in 1.0 dB increments.

 

 

SUBWOOFER Set this between –6.0 dB and

0.0 dB+6.0 dB in 1.0 dB increments (FST-ZX100D/LBT-ZX100D/ MHC-GN1000D only).

Set this between –10.0 dB and +10.0 dB in 1.0 dB increments (FST-ZX80D/LBT-ZX80D only).

Depending on the sub woofer, the sound output may be smaller compared to other speakers when you adjust the “SUBWOOFER” setting during test tone.

xLEVEL (SURROUND)

You can adjust the level of each surround speakers as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.

This setting cannot be selected when “SURROUND” is set to “NONE” in the “SIZE” setting.

LSet this between –6.0 dB and

0.0 dB

+6.0 dB in 1.0 dB increments.

 

 

RSet this between –6.0 dB and

0.0 dB

+6.0 dB in 1.0 dB increments.

 

 

Tip

To adjust the volume of all speakers at the same time, press VOLUME +/– repeatedly (or turn MASTER VOLUME on the unit).

xTEST TONE

The speakers will emit a test tone to adjust “LEVEL (FRONT)” and “LEVEL (SURROUND)”.

OFF The test tone is not emitted from the speakers.

ON The test tone is emitted from each speaker in sequence (FST-ZX100D/LBT-ZX100D/ MHC-GN1000D only).

The test tone is emitted from each speaker in sequence except for subwoofer (FST-ZX80D/LBT-ZX80D only).

The test tone is emitted from the selected speakers when you select “LEVEL (FRONT)” or “LEVEL (SURROUND)”.

Adjusting the speaker level by using the test tone

1 Press DISPLAY when playback is stopped.

The Control Menu appears on the TV screen.

2 Press V or v repeatedly to select (SETUP), then press ENTER.

The options for “SETUP” appear on the TV screen.

3 Press V or v repeatedly to select “CUSTOM”, then press ENTER.

The Setup menu appears on the TV screen.

4 Press V or v repeatedly to select “SPEAKER SETUP”, then press

ENTER.

5 Press V or v repeatedly to select “TEST TONE”, then press ENTER.6 Press V or v repeatedly to select “ON”, then press ENTER.

For FST-ZX100D, LBT-ZX100D and MHC-GN1000D, you will hear the test tone from each speaker in sequence.

For FST-ZX80D and LBT-ZX80D, you will hear the test tone from each speaker in sequence except for subwoofer.

7 Press V or v repeatedly to select “LEVEL (FRONT)”, then press ENTER.8 Press V or v repeatedly to select the speaker, then press ENTER.

The test tone is emitted from the selected speaker.

46US