Using the rotary commander

The rotary commander works by pressing buttons and/or rotating controls.

You can also control an optional CD/MD unit with the rotary commander.

By pressing buttons(the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Each time you press (SOURCE), the source changes as follows:

Tuner t CD t MD* t TV*

*If the corresponding optional equipment is not connected, these items will not appear.

Pressing (MODE) changes the operation in the following ways:

•Tuner: FM1 t FM2 t FM3 t AM1 t AM2

•CD unit: CD1 t CD2 t …

•MD unit*: MD1 t MD2 t …

•TV/Video*: TV1 t TV2 t AUX

*If the corresponding optional equipment is not connected, the item will not appear.

By rotating the control (the SEEK/AMS control)Rotate the control momentarily and release it to:

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to find a specific station.

By pushing in and rotating the control (the PRESET/DISC control)Push in and rotate the control to: •Receive the stations memorized on the

number buttons. •Change the disc.

24