ST300 SETUP |
|
|
|
|
| ST300 SETUP |
|
| |
|
|
|
| |
|
| Clear Cues | SetDefault |
|
|
|
|
| |
| Press Softkey beneath ClearCues to clear all Cue Points to 00:00:00:00. | |||
| Press Softkey [YES] when asked “Are You Sure?” | |||
| Press Softkey beneath SetDefault to set ST300 to default settings. | |||
| Press Softkey [YES] when asked “Are You Sure?” | |||
|
|
|
| |
DISPLAY | The version number for the currently installed software is displayed. | |||
SOFTWARE |
|
|
|
|
VERSION |
|
|
|
|
|
|
|
| |
SYNC | Set to ON if black burst is supplied to the Ref Video connector on the rear | |||
| panel. Set to OFF if no black burst is supplied. | |||
|
|
|
| |
VIDEO STANDARD | Sets Video Standard option to NTSC when [NTSC] is pressed. | |||
| OR |
|
| |
| Sets Video Standard option to PAL when [PAL] is pressed. | |||
|
|
|
| |
RECALL MODE | Press [NORMAL] or [REDIR] (redirect). | |||
| NORMAL – |
|
| |
| The cue point will load on the learned VTR. | |||
| REDIR – |
|
| |
| When one and only one clip is learned into a Cue Point, the Clip will be | |||
| REDIRECTD to load on the currently selected VTR. | |||
|
|
|
| |
PARITY | In hardware version 3.0 only, set the parity to the same as the switcher. | |||
| For hardware versions 2.0 and 2.1, no adjustment is provided or required. | |||
|
|
|
| |
RECORD | Press Softkey to select single button or | |||
| RECORD = [REC] Only OR [REC] + [PLAY]. | |||
|
|
|
| |
PBIO ADDRESS | Select to match the switcher output. (ALL hardware versions) | |||
|
|
|
| |
SWITCHER TYPE | Select to match the switcher type. (ALL Hardware versions) | |||
|
|
|
| |
TRANSMIT CUELIST | Transmit cuelist to another ST300 or to a PC. | |||
|
| |||
RECEIVE CUELIST | Receive cuelist from another ST300 or PC. | |||
|
|
|
|
|
15