Replacing the ear pads
When the ear pads become dirty or damaged, you can get replacements from your Sony dealer. Replace them as illustrated below.
1 Remove the old ear pad by pulling it off from the driver unit.
2 Place the new ear pad around the driver unit as illustrated.
(Additional information
Precautions
•The CE mark on the unit is valid only for products marketed in the European Union.
•When the transmitter is not to be used for a long period of time, disconnect the AC power adaptor from the AC outlet holding the plug. Do not pull on the cord.
•Do not leave the cordless stereo headphone system in a location subject to direct sunlight, heat or moisture.
Notes on headphones Preventing hearing damage Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.
Caring for others
Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you.
If you have any questions or problems concerning the system that are not covered in this manual, please consult the nearest Sony dealer.
Be sure to bring the headphones and the transmitter to the Sony dealer when requiring repair work.
10