3 Close the battery compartment lid.

4 Connect the supplied AC power adaptor to the transmitter.

Transmitter

to an AC outlet

AC power adaptor

to DC IN (supplied)

9 V jack

5 Rest the headphones on the transmitter so that the contact pins fit into the contact holes on the headphones. The charging indicator lights.

Notes

•Use only the supplied rechargeable battery NC-AA (HJ).

•You cannot recharge other R6 (size AA) rechargeable battery (NC-AA etc.) with this unit.

When the indicator is not lit

Check the connection to make sure that the contact pins are properly fitted into the contact holes on the headphones, or if the headphones are rested on the transmitter correctly.

To recharge the headphones’ battery after use

To charge the battery, follow steps 4 and 5. Since little electric current is used for charging, there is no need to worry about overcharging.

Charging and using hours

Approx. charging Approx. using

hourshours*

11.5

24**30

*at 1 kHz, 1 mW+1 mW output

**the hours required to fully charge an empty battery

Using the headphones with a commercially available R6 (size AA) dry battery

Install the battery in the same manner as described in steps 1 through 3 of “Charging the headphones’ battery.”

When a R6 (size AA) dry battery is installed, the battery charge function is not activated.

Battery life*

 

 

 

 

 

Battery

 

Approx. hours

 

 

 

Sony alkaline battery

100

LR 6 (SG)

 

 

 

 

 

Sony battery R6P (SR)

50

 

 

 

* at 1 kHz, 1 mW+1 mW output

(Continue to next page)

7