3Rest the headphones on the transmitter so that the headphones’ contact point meets the transmitter’s contact pin, and make sure that the CHG indicator lights up.
It takes approx. 3 hours to fully charge the battery (the CHG indicator goes off when charging is complete).
When placing the headphones on the transmitter, be sure to hold them with both hands so that the right and left housings are horizontal, and place the headphones vertically on the transmitter. The charging lever is pushed down and the contact pin comes up. When the transmitter’s contact pin meets the headphones’ contact point, the CHG indicator lights up.
Contact point
Charging | Right | |
lever | ||
housing | ||
| ||
Contact pin | CHG | |
| indicator | |
| Left housing |
If the CHG indicator is not lit
•Be sure to close the battery compartment lid. The battery charge function is not activated when the lid is not fully closed.
•Check if the right and left headphones are rested on the transmitter correctly.
•The indicator will not light up if the headphones’ contact point does not meet the transmitter’s contact pin. In this case, remove the headphones and place them on the transmitter again so that the indicator lights up.
•Make sure that the supplied rechargeable
•If the rechargeable battery is damaged or the 3 and # of the battery do not match those in the battery compartment correctly, the CHG indicator blinks.
(Continued)
Preparation 11US