Symptom | Cause and remedy | |
|
| |
The battery | ,Check if the CHG indicator turns on. If not, put the headphones on the | |
cannot be | transmitter correctly so that the CHG indicator turns on. | |
charged | ,Dry batteries are installed. | |
| ||
| • Insert the supplied rechargeable | |
| ,Rechargeable batteries other than the supplied are installed. | |
| • Insert the supplied rechargeable | |
| ,The transmitter’s contact pin and headphones’ contact point are dusty. | |
| • Wipe them with a cotton bud, etc. | |
| ||
The CHG indicator ,3 and # of the rechargeable battery do not match those in the battery | ||
blinks. | compartment correctly. | |
| • Insert the rechargeable battery with correct polarity. | |
| ,The rechargeable battery is damaged. | |
| • Replace it with a new one. The rechargeable battery, type | |
| commercially available. You can order the battery from the store where you | |
| purchased this system, or at your nearest Sony dealer. | |
|
| |
RF signal | ,Signal noise is output from the connected analog component. | |
transmission does | • Unplug the connected analog component, or set the INPUT SELECT switch | |
not stop. (when the | ||
on the transmitter to "DIGITAL," and make sure playback of the component | ||
INPUT SELECT | ||
connected to the DIGITAL IN jack is stopped. | ||
switch on the | ||
| ||
transmitter is set |
| |
to “ANALOG”) |
| |
|
| |
No signal from | ,No power supplied to the transmitter. | |
optical digital | • Connect the transmitter to a power source. | |
output | ||
,No playback sound from the connected external digital unit at the optical | ||
| ||
| input jack. | |
| • Check that the external unit is playing back. | |
|
| |
Bilingual sound | ,Connect the analog out to the LINE IN jacks, and select the sound on the | |
cannot be selected | connected component. | |
when using digital |
| |
input. (Both MAIN |
| |
and SUB can be heard at the same time.)
(Continued)
Additional Information |
| 25US |
|
|
|