Symptom | Cause and remedy |
|
|
Distorted or | ,Charge the rechargeable battery if it is weak, or replace alkaline batteries with |
intermittent sound | new ones. If the POWER indicator is still off after charging the battery, take |
(sometimes with | the headphones to a Sony dealer. |
noise) | ,Check if there is any wireless apparatus using 2.4 GHz frequency, or a |
| |
| microwave oven in the vicinity. |
| ,Change the position of the transmitter. |
| ,When analog input is selected, change the ATT switch on the transmitter to |
| |
| ,If you connect the transmitter to an AV component using the headphone jack, |
| lower the volume level on the connected AV component. |
|
|
Low sound | ,When analog input is selected, change the ATT switch on the transmitter to "0 |
| dB." |
| ,If you connect the transmitter to an AV component using the headphone jack, |
| raise the volume level on the connected AV component. |
| ,Raise the headphone volume. |
|
|
Loud background | ,Check if there is any wireless apparatus using 2.4 GHz frequency, or a |
noise | microwave oven in the vicinity. |
| ,If you connect the transmitter to an AV component using the headphone jacks, |
| raise the volume level on the connected AV component. |
| ,Charge the rechargeable battery if it is weak, or replace alkaline batteries with |
| new ones. If the POWER indicator is still off after charging the battery, take |
| the headphones to a Sony dealer. |
The sound cuts off ,The transmitter stops transmitting signals if 5 minutes passes and no signal has been input.
• Set the ATT switch on the transmitter to “0 dB.”
• If you connect the transmitter to an AV component using the headphone jack, raise the volume level on the connected AV component.
24US |
| Additional Information |
|
|
|