Alps Electric MD-1300 manual ¨ Install the Ink Cartridges, ¨ Load Paper

Chapter 2 - Various Printing Operations

Step 2¨ Install the Ink Cartridges

Install one cyan, one magenta, and one yellow ink cartridge, and one Finish cartridge in the ink cartridge holders. The cartridges may be installed in any order.

Step 3¨ Load Paper

Manual feed mode is used for this printing.

1.Set the paper feed switch to position "M".

2.For Photo Realistic Paper (Letter / A4 size) or laser paper, fully extend the paper support.

3.Adjust the paper feed guide to the width of the paper plus several millimeters.

4.Load one sheet of paper in the sheet feeder and press the ready/insert button.

Note

∙Be sure to manually feed Photo Realistic Paper and Labels one at a time.

∙For Photo Realistic Paper and Labels, load so that the glossy surface faces upward.

∙Provide a gap of several millimeters between the paper feed guide and Photo Realistic Paper and Labels. Otherwise, pa- per may not feed correctly.

∙Laser paper and High Grade Paper can be continuously printed using automatic feeding. To do so, load the paper by placing the paper feed switch in position "A".

64