Printing on Photographic-Quality Labels

Step 1¨ Create Data for Printing on Photographic-Quality La- bels

Use the application of your choice to create the text and graphics you want, and lay them out within the printable area of a Photo- graphic-Quality Label.

The following explanation will assume the use of Photographic- Quality Labels (2 stickers). Follow the same general sequence when you use Photographic-Quality Labels (20 stickers).

Photographic-Quality Labels templates have been prepared in the Label folder of the ALPS Installation CD-ROM included in the pack- age. When creating data using those templates, please see the section “How to Use Photo Label Templates” in the “Read Me” file on the ALPS Installation CD-ROM for instructions. You may use them, or employ some other application to lay out the data ac- cording to the print format shown below.

19.8mm (0.78")

3.6mm (0.14")

20 stickers

8.5mm (0.33")

17mm

(0.67")

22mm (0.87")

12.5mm (0.49")

19.8mm (0.78")

2 stickers

75mm (2.95")

52mm (2.05")

164mm (6.46")

20.4mm (0.8")

164mm (6.46")

5mm (0.2")

 

100mm (3.94")

100mm (3.94")

Step 2¨ Install the Photographic-Quality Ink Cartridges

Install the Photographic-Quality ink cartridges into the ink car- tridge holders. The ink cartridges may be installed in any order.

59

Page 61
Image 61
Alps Electric MD-1300 manual ¨ Create Data for Printing on Photographic-Quality La- bels, Stickers