Alps Electric MD-1300 manual ¨ Transfer the Iron-On to Cloth

Making Iron -on Transfers

7.Once the settings have been finished, click the OK but- ton.

Note

For information on the color matching selections, see Chapter 1, "Printing Operations".

8.To start printing, click Print in the Print dialog box.

Step 5¨ Transfer the Iron-On to Cloth

Use an iron to transfer the image to cloth after the printing on the iron-on transfer sheet is completed.

1.Cut around the printed image as close to the edges of the image as possible.

2.Place the printed side on the cloth and press down evenly with an iron (set to dry).

Using care not to let the iron-on transfer sheet shift, firmly ap- ply pressure until the iron-on transfer is completely attached to the cloth.

Iron-on Transfer Sheet

Cloth the iron-on will be transferred to

Note

∙Use the iron to remove wrinkles in the cloth before affixing the iron-on.

∙Set the iron heat to 160°C/320°F (cotton). If the iron has out- let holes for steam, set the iron to Dry and avoid the holes, using a flat part of the iron.

117