Chapter 1 – Major Functions and Operations

Getting Your Printer Ready

Set up your printer by performing the following steps:

Getting your printer ready.

Remove the packing materials.

Connecting cables.

Connect the printer to your computer with a printer cable and to a suitable AC power source with the power cord.

Getting Your Printer Ready

Get your printer ready by removing the packing materials from inside and outside the printer.

Caution

This printer is shipped with tape, spacers, and other packing materials to prevent delicate parts from being damaged while in transit. Remove these packing materials before using the printer. If the printer is used while these packing materials are still present, damage to the printer or malfunction may occur.

Removing the outside packing materials

The printer is shipped with packing materials to prevent damage during transit.

Remove the tape (three locations in front) and cardboard from the printer before using.

CardboardTape

10

Page 12
Image 12
Alps Electric MD-1300 Getting Your Printer Ready, Removing the outside packing materials, Remove the packing materials