Alps Electric MD-1300 manual Lift the paper stopper, Load paper

Chapter 1 – Major Functions and Operations

3.Lift the paper stopper.

Gently press the upper part of the paper stopper to raise its lower part. If the stopper is forced upward, it may slip out.

Paper stopper

Note

To load Photographic-Quality Paper (4" x 6" / 100 x 148 mm) or

Photographic-Quality Labels, do not lift the paper stopper.

4.Load paper.

Extend the paper feed guide until it is slightly wider than the paper to be used. Riffle the sheets of paper, and then insert them into the sheet feeder so that the right edge of the paper is flush with the right edge of the guide. Set the sheets with the printing surface facing upward.

Note

Riffle the sheets before loading them into the sheet feeder. If the sheets adhere to one another during loading, multiple sheets may be fed in together.

Make sure that the paper has no more than 0.2" / 5 mm of bend. If the paper used is significantly bent, print quality may be de- graded.

Note

For continuous printing on Photographic-Quality Paper (4" x 6"

/100 x 148 mm) or Photographic-Quality Labels, load the guide sheet supplied with the paper into the sheet feeder. Then place the sheets or labels on the guide sheet.

guide sheet

26