Notes
•Do not input signals other than PCM to the DIGITAL IN jack. Be sure to set optical digital output of a connected AV component to PCM. If
•The optical digital connecting cable is an extremely
•The digital input for the transmitter does not support sampling frequencies of 96 kHz. Set the digital output setting of the DVD device to 48 kHz when using this system. Noise may be heard when a 96 kHz digital signal is input.
Connecting cables (sold separately)
Use the optical digital connecting cable
Notes on optical digital connecting cable
•Do not drop objects on the optical digital connecting cable or expose the cable to shock.
•Grasp the plug to connect or disconnect the cable.
•Be sure that the ends of the optical digital connecting cable are kept clean. Dust at the ends of the cable can degrade performance.
•When storing the system, attach the cap to the end of the plug and be careful not to fold or bend the optical digital connecting cable with a bend radius less than 25 mm (1 inch).
The bend radius of the optical digital connecting cable should be no less than 25 mm (1 inch).
25 mm (1 inch)
16US Connection