Sony MDS-E52 Locating a Specific Track, Playing MDs, To pause playing at the beginning of a track

Playing MDs

You can check the track name at any time while playing an MD Z

Press SCROLL on the remote.

Since the display shows up to 12 characters at a time, press SCROLL again to see the rest of the track title if the title has 13 characters or more.

Press SCROLL again to pause scrolling, and again to continue scrolling.

Locating a Specific Track

You can quickly locate any track while playing a disc by using AMS (Automatic Music Sensor), = and +, number buttons or M.SCAN on the remote.

When you directly locate a track with a number over

25Z

You must press >25 first, before entering the corresponding digits.

Press >25 once if it is a 2-digit track number, and twice if it is a 3-digit track number.

To enter “0,” press button 10. Examples: • To play track number 30

Press >25 once, then 3 and 10.

•To play track number 100

Press >25 twice, then 1, 10 and 10.

You can change the playing time during music scan

1	While the recorder is stopped, press EDIT/NO to
	display “Setup Menu.”
2	Turn AMS until “M. Scan” menu appears in the
	display, then press AMS.
3	Turn AMS to select the length of the M.SCAN play
	within the range of 6 to 20 seconds, using steps of

≠ AMS ±

6

Number buttons

about one second, then press AMS.

4 Press EDIT/NO.

To pause playing at the beginning of a track

Turn AMS (or press = or +) after pausing playback.

>25 M.SCAN

·· P p

=/+ = + r

0 )

To go quickly to the beginning of the last track

Turn AMS counterclockwise (or press =) while the display shows the total number of tracks and total disc playing time, remaining recordable time of the disc, or disc name (see page 15).

To locate	Do the following:
The next or	During playback, turn AMS clockwise
succeeding tracks	(or press +repeatedly) until you
	find the desired track.
The current or	During playback, turn AMS
preceding tracks	counterclockwise (or press =
	repeatedly) until you find the desired
	track.
A specific track	Press number buttons to enter the
directly	track number.
A specific track by	1 Turn AMS until the desired track
using AMS		number appears while the recorder
		is stopped. (The track number is
		flashing.)
	2 Press AMS or ·.
By scanning each	1	Press M.SCAN before you start
track (music scan)		playing.
	2	When you find the desired track,
		press ·to start playing.

16

1/15-21_MDS-E52.12E 16 99.1.29, 10:38 AM

Actual total number: Sony Sound Tec MDS-E52(E) 2-346-702-12(1)