Playing MDs
zThe track name and disc name are displayed as follows:
The disc name appears whenever the deck is stopped, and the name of the current track appears when the track is playing. If no title is recorded, “No Name” appears instead of a title.
To label a recordable disc and its tracks, see “Labeling Recordings” on page 45.
Changing the display
Each time you press DISPLAY/CHAR (or DISPLAY) while the deck is stopped or playing, you can change the display as follows:
Normal display
zYou can scroll a title of more than 12 characters
Press SCROLL/CLOCK SET (or SCROLL). Since the display shows up to 11 characters at a time, press SCROLL/CLOCK SET again to see the rest of the title if the title has 12 characters or more.
Press SCROLL/CLOCK SET again to pause scrolling, and again to continue scrolling.
Displaying the recording date Z
When the internal clock has been set, the deck automatically records the recording date and time of all recordings. You can then check the recording date and time of a track.
Press
The contents of a program (only when “PROGRAM” lights up)
Press
Title (Disc name and track name)
1Locate the track for which you want to check the recording date and time.
When the deck is | Press |
|
|
stopped | =or + |
playing or on play pause =, +, or number buttons
2Press DATE RECORDED.
“No Date” appears if the internal clock has not been set or the track was recorded on another MD deck without a date and time stamp function.
Press
Output level (The recording level is displayed while the deck is stopped.)
Press
Pitch display
Press