Naming a track or an MD using the controls on the deck
1 While the deck is stopped, playing, recording, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS until “Nm In?” appears, then press AMS or YES.
While the deck is recording, a flashing cursor appears in the display and you can enter a name for the track being recorded. In this case, go to step 4.
3 Turn AMS until the track number (when naming a track) or “Disc” (when naming the MD) flashes, then press AMS or YES.
A flashing cursor appears.
When naming a track, the deck starts playing and you can name a track while monitoring the sound.
4 Press DISPLAY/CHAR repeatedly to select the character type.
Each time you press the button, the display changes cyclically as follows:
(Blank space) t A (Upper cases) t a (Lower cases) t 0 (Numbers) t ’ (Symbols)
To enter a space
Press M while the cursor is flashing. You cannot enter a space as the first character.
5 Turn AMS to select the character.
The selected character flashes.
To enter a symbol
You can use the following symbols in titles: ’
To change a selected character
6 Press AMS.
The selected character is entered and lights continuously. The cursor shifts to the right, flashes, and waits for the input of the next character.
7 Repeat steps 4 to 6 to enter the rest of the name.
To change a character
Press m/M repeatedly until the character to be changed flashes, then repeat steps 4 to 6.
To erase a character
Press m/M repeatedly until the character to be erased flashes, then press
CLEAR.
8 Press YES.
The whole name appears in the display, followed by “Complete!.”
Naming a track or an MD using the remote
1 Press NAME EDIT/SELECT depending on what you want to name:
To name | Press while |
A track | The track number is displayed |
|
|
The MD | The deck is stopped with total |
| number of tracks (or groups when |
| the Group function is on) |
| displayed |
|
|
A flashing cursor appears in the display.
2 Press NAME EDIT/SELECT repeatedly to select the character type.
Each time you press the button, the display changes cyclically as follows:
“Selected AB” (Upper cases or symbols) t “Selected ab” (Lower cases or symbols) t “Selected 12” (Numbers)
MDs Recorded Editing
continued