Editing Recorded MDs
Before you start editing
Before editing
You can edit an MD only when:
•The MD is recordable.
•The MD play mode is normal play.
Note
When the Group function is on, editing can be performed only for the tracks registered into the selected group.
To cancel the last edit
Use Undo Function to cancel the last edit and restore the contents of the MD to the condition before the edit.
To quit while editing
Press MENU/NO or x.
About indications which appear while editing
When “C11/Protected” appears in the display
The MD is
When “TrProtected” appears in the display
You cannot perform editing operations on protected tracks (tracks checked out from a USB connected computer, etc.) other than “Moving recorded tracks” on page 30 and “Naming a track or an MD” on page 30 using this deck.
When “Cannot Edit” appears in the display
You cannot edit the MD in Shuffle or Programme Play mode. Press PLAY MODE repeatedly until both “PGM” and “SHUF” disappear.
After editing
Press EJECT A to remove the MD or press ?/1 to turn off the deck.
“TOC” or “TOC Writing” starts flashing. The TOC is updated and recording is completed.
Before disconnecting the mains lead
MD editing is completed when the MD Table of Contents (TOC) is updated. The TOC is updated when you eject the MD or press ?/1 to turn off the deck. Do not disconnect the mains lead before updating the TOC (while “TOC” is lit) or while updating the TOC (while “TOC Writing” is flashing) to ensure a complete editing.
MDs Recorded Editing