OPERATION

BASIC OPERATING/CUTTING PROCEDURES

Practice cutting a few small logs using the following technique to get the “feel” of using your saw before you begin a major sawing operation.

1.Take the proper stance in front of the wood with the saw idling.

2.Accelerate the engine to full throttle just before entering the cut by squeezing the throttle trigger.

3.Begin cutting with the saw against the log.

4.Keep the engine at full throttle the entire time you are cutting.

5.Allow the chain to cut for you; exert only light downward pressure. Forcing the cut could result in damage to the bar, chain, or engine.

6.Release the throttle trigger as soon as the cut is com- pleted allowing the engine to idle. Running the saw at full throttle without a cutting load can result in unneces- sary wear to the chain, bar, and engine.

7.Do not put pressure on the saw at the end of the cut.

WORK AREA PRECAUTIONS

Cut only wood or materials made from wood; no sheet metal, no plastics, no masonry, no non-wood building materials.

Never allow children to operate your saw. Allow no person to use this chain saw who has not read this operator's manual or received adequate instructions for the safe and proper use of this chain saw.

Keep everyone – helpers, bystanders, children, and animals, a SAFE DISTANCE from the cutting area. During felling operations, the safe distance should be a least twice the height of the largest trees in the felling area. During bucking operations, keep a minimum distance of 15 feet (4.5m) between workers.

Fig. 23

Always cut with both feet on solid ground to prevent being pulled off balance.

Do not cut above chest height as a saw held higher is difficult to control against kickback forces.

Do not fell trees near electrical wires or buildings. Leave this operation for professionals.

Cut only when visibility and light are adequate for you to see clearly.

ADJUSTING THE CARBURETOR

Before adjusting the carburetor, clean the air filter and the starter cover vents. Allow the engine to warm up prior to carburetor adjustment. Refer to “Maintenance” later in this manual.

AIR FILTER

Fig. 24

STARTER COVER

 

VENTS

Fig. 25

The carburetor is factory set and should not require adjusting. The carburetor will permit only limited adjust- ment of the “L” (Low Jet) and “H” (High Jet) needles. Any adjustment should be done by a Homelite Service Center.

Under no circumstances should the “L” (Low Jet) and “H” (High Jet) needles be forced outside the range of adjust- ment.

CAUTION:

Serious damage can occur to the engine if improper adjustments are made to the “L” and “H” needles.

Do not force the “L” and “H” needles outside the adjustment range!

Page 15

Page 15
Image 15
Homelite UT10927A manual Basic OPERATING/CUTTING Procedures, Work Area Precautions, Adjusting the Carburetor, AIR Filter

UT10927A specifications

The Homelite UT10927A is a robust and efficient cordless string trimmer designed to meet the needs of homeowners and landscaping professionals. This powerful trimmer is known for its user-friendly features, impressive battery life, and innovative technology that enhances its performance in various outdoor tasks.

One of the standout features of the Homelite UT10927A is its lightweight design, making it easy to maneuver and operate for extended periods without causing fatigue. Weighing in at just under 10 pounds, the trimmer allows users to navigate tight corners and hard-to-reach areas with ease. This portability is complemented by its ergonomic handle, which provides a comfortable grip and reduces strain on the hands and arms during longer gardening sessions.

The UT10927A is equipped with a high-performance 2Ah lithium-ion battery, which ensures consistent power and runtime. With an impressive cutting width of 12 inches, this trimmer efficiently handles thick grass and weeds, allowing for a cleaner and more precise cut. The battery technology not only delivers strong power but also charges quickly, making it convenient for users who require frequent use without lengthy downtime.

Another significant technological advancement in the UT10927A is its automatic feed spool system. This feature allows for a smooth and effortless line advancement, which means users can focus on their trimming tasks without the hassle of manually feeding the line. The trimmer is compatible with standard .065-inch replacement line, ensuring that users can easily find materials for upkeep.

Additionally, the UT10927A boasts a dual-line system, providing enhanced cutting performance for larger areas while maintaining a sleek and manageable design. The trimmer head can be adjusted for different angles, allowing for versatility when tackling diverse garden features, including edges, flower beds, and low shrubbery.

Safety is also a key consideration in the design of the Homelite UT10927A. It includes a protective shield that safeguards the user from debris during operation, as well as a reliable motor that provides consistent power without the fumes associated with gas-powered trimmers.

In summary, the Homelite UT10927A is a versatile and user-friendly cordless string trimmer aimed at providing efficiency and power in outdoor maintenance tasks. Its lightweight design, long-lasting battery, automatic feed system, and dual-line capability make it an excellent choice for both novice gardeners and seasoned professionals looking to keep their lawns in pristine condition.