OPERATION
STARTING A COLD ENGINE:
3.Move the chain brake to the BRAKE position.
Note: Set the chain brake by pushing the chain brake lever/hand guard forward (towards the bar), to the brake position. Refer to “Operation – Operating Chain Brake” for additional information.
4. Set the ignition switch to the RUN (I) position.
5. Fully press and release the PRIMER BULB 7 times.
6.Pull CHOKE lever all the way OUT to full position. The
partial throttle position is automaticaaly set when the choke lever is set at full choke.
CHOKE LEVER
Fig. 16
STARTER
GRIP
CHOKE LEVER
Fig. 14
Fig. 17
STARTER
GRIPTRIGGER
RELEASE
RUN POSITION
Fig. 15 | THROTTLE TRIGGER |
Fig. 18
Page 12
