MAINTENANCE

TIGHTEN 3/4 OF

A TURN

Fig. 70

MOUNTING THE SAFE-T-TIP® NOSE GUARD

See Figure 70.

1.Mount the SAFE-T-TIP®on the bar nose. See Fig- ure 70.

2.Fit the locking rivet or tab in the recessed hole in the guide bar.

3.Tighten the screw with your finger.

4.From the finger tight position, tighten the screw an additional 3/4 of a turn using a wrench.

CLEANING THE AIR FILTER

Note: Always clean the air filter before making any mixture adjustments of the carburetor.

1.For access to the air filter and carburetor area, loosen the three screws holding the cylinder cover.

2.Activate chain brake.

3.Lift the front of the cylinder cover past chain brake lever.

4.Lift the back of the cylinder cover past the handle.

5.Before removing the air filter from the carburetor, blow or brush as much loose dirt and sawdust from around the carburetor and chamber as possible.

Note: Make sure to pull the choke rod out to keep the carburetor from being contaminated.

6.Remove the screw securing the air filter.

7.Position a flat screw driver between the tabs and twist as shown in the illustration.

8.Lift the air filter off the air filter base.

Choose one of the following cleaning options:

9.To lightly clean, tap the filter against a smooth, flat surface to dislodge most saw dust and dirt particles.

10.For a more thorough cleaning, clean in warm soapy water, rinse, and let dry completely.

Note: An alternate method is to clean the filter with compressed air (always wear eye protection to avoid eye injury).

11.Reinstall the air filter, making sure that the tabs on the air filter are located in channels on the air filter bottom before tightening filter retainer screw.

■Clean the pre-filter every 25 tanks of fuel or sooner, if required. Remove the cylinder cover, starter assembly and the fan housing baffle for access to the pre-filter in the engine housing.

Note: If you use an air hose for drying, blow through both sides of filter.

CAUTION:

Never run the engine without the air filter, serious damage could result.

Make sure the air filter is correctly placed in the air filter cover before reassembly.

CYLINDER COVER

SCREW

SCREWS

Fig. 71

AIR FILTER

AIR FILTER

RETAINING

SCREW

Fig. 72

FAN

HOUSING

BAFFLE

PRE-FILTER

STARTER ASSEMBLY

Fig. 73

Page 30

Page 29 Page 31
Page 30
Image 30
Homelite UT10927A manual Mounting the SAFE-T-TIP Nose Guard, Cleaning the AIR Filter, Tighten 3/4 Turn
Page 29 Page 31

UT10927A specifications

The Homelite UT10927A is a robust and efficient cordless string trimmer designed to meet the needs of homeowners and landscaping professionals. This powerful trimmer is known for its user-friendly features, impressive battery life, and innovative technology that enhances its performance in various outdoor tasks.

One of the standout features of the Homelite UT10927A is its lightweight design, making it easy to maneuver and operate for extended periods without causing fatigue. Weighing in at just under 10 pounds, the trimmer allows users to navigate tight corners and hard-to-reach areas with ease. This portability is complemented by its ergonomic handle, which provides a comfortable grip and reduces strain on the hands and arms during longer gardening sessions.

The UT10927A is equipped with a high-performance 2Ah lithium-ion battery, which ensures consistent power and runtime. With an impressive cutting width of 12 inches, this trimmer efficiently handles thick grass and weeds, allowing for a cleaner and more precise cut. The battery technology not only delivers strong power but also charges quickly, making it convenient for users who require frequent use without lengthy downtime.

Another significant technological advancement in the UT10927A is its automatic feed spool system. This feature allows for a smooth and effortless line advancement, which means users can focus on their trimming tasks without the hassle of manually feeding the line. The trimmer is compatible with standard .065-inch replacement line, ensuring that users can easily find materials for upkeep.

Additionally, the UT10927A boasts a dual-line system, providing enhanced cutting performance for larger areas while maintaining a sleek and manageable design. The trimmer head can be adjusted for different angles, allowing for versatility when tackling diverse garden features, including edges, flower beds, and low shrubbery.

Safety is also a key consideration in the design of the Homelite UT10927A. It includes a protective shield that safeguards the user from debris during operation, as well as a reliable motor that provides consistent power without the fumes associated with gas-powered trimmers.

In summary, the Homelite UT10927A is a versatile and user-friendly cordless string trimmer aimed at providing efficiency and power in outdoor maintenance tasks. Its lightweight design, long-lasting battery, automatic feed system, and dual-line capability make it an excellent choice for both novice gardeners and seasoned professionals looking to keep their lawns in pristine condition.
Top Page Image Contents