MDS-JE630
SERVICE MANUAL
US Model Canadian Model
U.S. and foreign patents licensed form Dolby Laboratories Licensing Corporation.
Model Name Using Similar Mechanism | |
|
|
MD Mechanism Type | |
|
|
Base Unit Type | |
|
|
Optical | |
|
|
SPECIFICATIONS
System | MiniDisc digital audio system | Outputs |
|
Disc | MiniDisc | PHONES | Jack type: stereo phone |
Laser | Semiconductor laser (λ = 780 nm) |
| Rated output: 28 mW |
| Emission duration: continuous |
| Load impedance: 32 ohms |
Laser output | Less than 44.6 µW* | LINE (ANALOG) OUT | Jack type: phono |
| * This output is the value measured |
| Rated output: 2 Vrms (at 50 kilohms) |
| at a distance of 200 mm from the |
| Load impedance: over 10 kilohms |
| objective lens surface on the Optical | DIGITAL OUT | Connector type: square optical |
|
| Rated output: | |
Laser diode | Material: GaAlAs |
| Load impedance: 660 nm (optical |
Revolutions (CLV) | 400 rpm to 900 rpm |
| wave length) |
Error correction | Advanced Cross Interleave Reed |
|
|
| Solomon Code (ACIRC) | General |
|
Sampling frequency | 44.1 kHz | Power requirements | 120 V AC, 60 Hz |
Coding | Adaptive Transform Acoustic Coding | Power consumption | 17 W |
| (ATRAC) | Dimension (approx.) | 430 × 95 × 280 mm |
Modulation system | EFM |
| (17 × 3 3/4 × 11 1/8 in.) (w/h/d) incl. |
Number of channels | 2 stereo channels |
| projecting parts and controls |
Frequency response | 5 to 20,000 Hz ±0.3 dB | Mass (approx.) | 3.4 kg (7 lbs 11 oz) |
Over 98 dB during playback |
|
| |
Wow and flutter | Below measurable limit | Supplied accessories |
|
|
| • Audio connecting cords (2) | |
Inputs |
| • Optical cable (1) |
|
LINE (ANALOG) IN | Jack type: phono | • Remote commander (remote) | |
| Impedance: 47 kilohms | • R6 | |
| Rated input: 500 mVrms |
|
|
| Minimum input: 125 mVrms | Design and specification are subject to change without notice. | |
DIGITAL IN | Connector type: square optical |
|
|
| Impedance: 660 nm (optical wave length) |
|
|
MINIDISC DECK
MICROFILM