3-3. SLIDER (CAM)
6 Slider (Cam)
2Bracket (Guide L)
1Two screws (BTP 2.6 x 6)
3Leaf spring
• Note for Installation of Slider (Cam)
Set the shaft of Cam gear to be at the position in the figure.
Set the shaft of Lever (O/C) to be at the position in the figure.
4 Two screws (BTP 2.6 x 6)
5Bracket (Guide R)
3-4. BASE UNIT (MBU-5A) AND BD BOARD
5Flexible board (CN104)
6 Flexible board (CN101)
14
2Base unit
1 Three screws (BTP2.6 x 6)
3 Remove the solder (Five position)
7BD board
4Screw (M1.7 x 4)