![](/images/backgrounds/19074/19074-4820x1.png)
MDs on Recording
Synchro-recording With a Sony CD Player (CD Synchro-recording)
Operations you may want to do during CD Synchro-recording
To | Press |
Stop recording | |
|
|
Pause recording | |
| PLAYER X |
|
|
Locate the next track to be | CD PLAYER ./> |
recorded during recording |
|
pause |
|
|
|
Resume recording after | |
pausing | X |
|
|
Check the remaining | DISPLAY (page 12) |
recordable time on the MD |
|
|
|
zYou can use the remote of the CD player during CD Synchro- recording
Press | To change the deck to | And change the CD player to |
|
|
|
H | Recording | Play |
|
|
|
x | Recording pause | Stop |
|
|
|
X | Recording pause | Pause |
|
|
|
zDuring CD Synchro-recording, track numbers are marked in the following ways:
• When the CD player is connected to the DIGITAL IN connector, track numbers are automatically marked as they appear on the CD.
• When the CD player is connected to the LINE (ANALOG) IN jacks, track numbers are automatically marked when “T.Mark LSync” has been selected (page 17).
• When you resume recording after recording pause, a new track number is automatically marked, regardless of the track marking parameter setting (“T.Mark LSync” or “ T.Mark Off”).
zYou can change CDs during CD Synchro-recording
1Press x on the CD player’s remote.
2Change the CD.
3Press H on the CD player’s remote. Recording resumes.
zYou can also perform synchro-recording with a Sony video CD player
By reprogramming the MD deck’s remote, you can use the procedure above to perform
Press number button 2 while pressing down ~/1 on the MD deck’s remote. You can now operate the MD deck and the video CD player with the remote. To control the CD player again, press number button 2 while pressing down ~/1 on the MD deck’s remote.
Notes
•When performing CD
•When you record tracks from certain CD or
20