Naming a Track or MD
You can enter a name for a recorded MD as well as for individual tracks. Names can consist of uppercase and lowercase letters, numbers, and symbols. A total number of 1,700 characters can be stored for all the names on the MD.
LEVEL/DISPLAY/CHAR | MENU/NO | AMS | YES | |
` / 1 | Z | N X | x | z |
|
| . | > |
|
| m |
|
| M |
2 | Turn AMS until “Name ?” appears, then press AMS |
| or YES. |
| While the deck is recording, a flashing cursor appears |
| in the display and you can enter a name for the track |
| being recorded. In this case, go to step 6. |
3 | Turn AMS until “Nm In ?” appears, then press AMS |
| or YES. |
4 | Turn AMS until the track number (when naming a |
| track) or “Disc” (when naming the MD) flashes, |
| then press AMS or YES. |
5 | Press AMS or YES again. |
| A flashing cursor appears. |
YES
CLEAR m/M
` / 1
Z
6 Press LEVEL/DISPLAY/CHAR repeatedly to select the |
character type. |
MENU/NO CLEAR
NAME CHAR
Letter/number buttons
X. >
HX
zx
m/M | . > + ./> |
m M | |
| – |
Note
If you name a track while it is being recorded, be sure to finish the naming operation before the track ends. If the track ends before you finish, the entered character data will be discarded and the track will remain unnamed. Also, you can’t name tracks while the deck is recording over existing material.
Naming a track or MD using the controls
on the deck
1Press MENU/NO while the deck is in one of the operating statuses listed below, depending on what you want to name:
To name | Press while the deck is |
|
|
A track or the MD | Stopped, playing, or paused |
|
|
The track being recorded | Recording the track |
|
|
“Edit Menu” appears in the display.
To select | Press repeatedly until |
Uppercase letters | “A” appears in the display |
|
|
Lowercase letters | “a” appears in the display |
|
|
Numbers | “0” appears in the display |
|
|
Symbols* | “!” appears in the display |
|
|
*The following symbols can be selected:
! ” # $ % & ’ ( ) * + ,
A
To enter a space
Press M while the cursor is flashing.
7Turn AMS to select the character.
The selected character flashes.
D
To change a selected character
Repeat steps 6 and 7.
MDs Recorded Editing
33