After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds.

In the Motion Display mode, all the items are scrolled in the display one by one in order.

Note

If you use personalised labels, they will always take priority over the original CD TEXT information when such information is displayed.

Tip

The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 24).

Automatically scrolling a disc name— Auto Scroll

If the disc name, artist name, or track name on an MD or a CD TEXT disc exceeds 8 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows:

•The disc name appears when the disc has changed (if the disc name is selected as the display item).

•The track name appears when the track has changed (if the track name is selected as the display item).

•The disc or track name appears depending on the setting when you press (SOURCE) to select an MD or CD TEXT disc.

If you press (DSPL/PTY) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off.

1 During playback, press (MENU).2 Press either side of (DISC/PRST) repeatedly until “A.SCRL-OFF” appears.3 Press the (+) side of (SEEK/AMS) to select “A.SCRL-ON.”4 Press (ENTER).

To cancel Auto Scroll, select “A.SCRL-OFF” in step 3.

Note

For some CD TEXT discs with very many characters, the following cases may happen:

—Some of the characters are not displayed.

—Auto Scroll does not work.

Locating a specific track—Automatic Music Sensor (AMS)

During playback, press either side of (SEEK/AMS) momentarily for each track you want to skip.

To locate

 

To locate

preceding

SOURCE

succeeding

tracks

tracks

 

Locating a specific point in a track—Manual Search

During playback, press and hold either side of (SEEK/AMS). Release when you have found the desired point.

To search

 

To search

backward

SOURCE

forward

 

 

Note

If “” or “” appears in the display, you have reached the beginning or the end of the disc and you cannot go any further.

Locating a disc—Disc Selection

When an optional CD/MD unit is connected, press either side of (DISC/PRST) to select the desired disc.

The desired disc in the current optional

CD/MD unit begins playback.

10