Sony MDX-C6500R, MDX-C6500RV, MDX-C6500RX, MDX-C6400R Locating a disc by name, Press, List-up, 1 Press (LIST), 7 Press (MENU) twice, Erasing the disc memo, 6 Press (ENTER) for two seconds

Press (ENTER).

Erasing the disc memo1 Press (SOURCE) repeatedly to select “CD.“2 Press (MODE) repeatedly to select the CD unit with the CUSTOM FILE function.

3 Press (MENU), then press either side of (DISC/PRST) repeatedly until “NAME DEL” appears.

4

5 Press either side of (DISC/PRST) repeatedly to select the disc name you want to erase.

6 Press (ENTER) for two seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase other names.

7 Press (MENU) twice.

The unit returns to normal CD play mode.

Notes

•To erase the disc memo, play a CD on the CD unit in which the disc memo you want to erase is stored.

•When a personalised label for a CD TEXT disc is erased, the original CD TEXT information will appear on the display.

Locating a disc by name

—List-up (For a CD unit with the CD TEXT function/CUSTOM FILE function, or an MD unit)

You can use this function for discs that have been assigned custom names or for CD TEXT discs.

You can locate the disc by

—its custom name: when you assign a name for a CD or an MD using a CD unit with the CUSTOM FILE function or an MD unit. (For information on disc names, see “Labelling a CD” on page 12).

—the CD TEXT information: when you play a CD TEXT disc on a CD unit with the CD TEXT function.

1 Press (LIST).

The name assigned to the current disc appears in the display.

When you assign a disc memo name to a CD TEXT disc, it takes priority over the original CD TEXT information.

2 Press either side of (DISC/PRST) repeatedly until you find the desired disc.3 Press (ENTER) to play the disc.

Notes

•When using the card remote commander, press (LIST) to return to normal play mode. When operating just by the unit’s button, the display returns to normal play mode after 5 seconds.

•The track names are not displayed during MD or CD TEXT disc playback.

•If there are no discs in the CD/MD unit, “NO DISC” appears in the display.

•If a disc has not been assigned a custom name, “********” appears on the display.

•Some letters cannot be displayed during MD or CD TEXT disc playback.

•If the disc information has not been read yet by the unit, “NOT READ” is displayed.

13