Specifications
MD Player section90 dB | |
Frequency response | 10 – 20,000 Hz |
Wow and flutter | Below measurable limit |
FM
Tuning range | 87.5 – 108.0 MHz |
Aerial terminal | External aerial connector |
Intermediate frequency | 10.7 MHz/450 kHz |
Usable sensitivity | 8 dBf |
Selectivity | 75 dB at 400 kHz |
66 dB (stereo), | |
| 72 dB (mono) |
Harmonic distortion at 1 kHz | |
| 0.6 % (stereo), |
| 0.3 % (mono) |
Separation | 35 dB at 1 kHz |
Frequency response | 30 – 15,000 Hz |
MW/LW |
|
Tuning range | MW: 531 – 1,602 kHz |
| LW: 153 – 279 kHz |
Aerial terminal | External aerial connector |
Intermediate frequency | 10.7 MHz/450 kHz |
Sensitivity | MW: 30 µV |
| LW: 40 µV |
Power amplifier section | |
Outputs | Speaker outputs |
| (sure seal connectors) |
Speaker impedance | 4 – 8 ohms |
Maximum power output | 50 W ⋅ 4 (at 4 ohms) |
Outputs | Audio outputs |
|
|
| Power aerial relay control | ||
| lead |
|
|
| Power amplifier control lead | ||
Inputs | Telephone ATT control lead | ||
| BUS control input |
| |
| connector |
|
|
| BUS audio input connector | ||
| Remote controller input | ||
| connector |
|
|
| Aerial input connector | ||
Tone controls | Bass ±9 dB at 100 Hz | ||
| Treble ±9 dB at 10 kHz | ||
Power requirements | 12 V DC car battery | ||
| (negative earth) |
| |
Dimensions | Approx. 178 ⋅ | 50 ⋅ | 177 mm |
| (w/h/d) |
|
|
Mounting dimensions | Approx. 182 ⋅ | 53 ⋅ | 161 mm |
| (w/h/d) |
|
|
Mass | Approx. 1.2 kg |
| |
Supplied accessories | Parts for installation and | ||
| connections (1 set) |
| |
| Front panel case (1) | ||
Optional accessories | Rotary commander |
| |
|
|
| |
| Card remote commander | ||
|
|
| |
| BUS cable (supplied with | ||
| an RCA pin cord) |
| |
| |||
Optional equipment | CD changer (10 discs) | ||
| |||
| CD changer (6 discs) |
MD changer (6 discs)
Source selector
Note
This unit cannot be connected to a digital preamplifier or an equalizer.
US and foreign patents licensed from Dolby laboratories.
Design and specifications are subject to change without notice.
25