Sony MHC-D60 manual RecordingaCD, CD Synchro Recording, To stop recording

RecordingaCD

— CD Synchro Recording

The CD SYNCHRO button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically.

DISC SKIP	4	2
POWER EX-CHANGE
0 )		¹

¤ á¸

¼	â	¼	â
» á	¹	¹	» á

¤ ¤

DOLBY NR 3 5 ¹ 1

1 Press ¤EJECT and insert a blank tape into deck B.

With the side

you want to	á »
record facing	�
forward
	¤

2 Press ¤ OPEN/CLOSE and place a CD.

Then press again to close the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP EX-CHANGE repeatedly so that it lights green.

With the label	0 )	¹
	¤	á¸
side up. When
you play a single
CD, place it on
the inner circle
of the tray.

3 Press CD SYNCHRO.

Deck B stands by for recording and the CD player stands by for playback. á (for front side) lights up.

4 Press DIRECTION repeatedly to select Ato record on one side. Select a (or RELAY) to record on both sides.

5 Press ¸ on deck B.

Recording starts.

To stop recording

Press ¹ on deck B or on the CD player.

Tips

•If you want to record from the reverse side, press » so that » (for reverse side) lights up.

•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

•When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears after pressing CD SYNCHRO.

Note

You cannot listen to other sources while recording.

Basic Operations

13