Sony MHC-D60 manual Specifications, For the U.S. model, Amplifier section, CD player section

Specifications

For the U.S. model

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

With 8 ohm loads, both channels driven, from 70 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than

0.9% total harmonic distortion from 250 milliwatts to rated output.

Amplifier section

Continuous RMS power output

Canadian model	100 + 100 watts
	(8 ohms at 1 kHz,
	5% THD)
Other models	70 + 70 watts
	(6 ohms at 1 kHz,
	10% THD)
Peak music power output (except for U.S. and
Canadian models):	1000 watts
Inputs	VIDEO/MD IN (phono
	jacks): voltage 250 mV,
	impedance 47 kilohms
	MIX MIC (phone jack):
	sensitivity 1 mV,
	impedance 10 kilohms
Outputs	VIDEO/MD OUT (phono
	jacks): voltage 250 mV

impedance 1 kilohms PHONES (stereo phone jack): accepts headphones of 8 ohms or more. SPEAKER: accepts impedance of 8 to 16 ohms (U.S. and Canadian models)

accepts impedance of 6 to 16 ohms (other models)

SURROUND SPEAKER (U.S. and Canadian models only): accepts impedance of 16 ohms.

SUPER WOOFER (except for MHC-D60):

Voltage 1 V, impedance 1 kilo ohm

CD player section

System	Compact disc and digital
	audio system
Laser	Semiconductor laser
	(λ=780nm)
	Emission duration:
	continuous
Laser output	Max. 44.6 μW*
	*This output is the value
	measured at a distance of
	200 mm from the
	objective lens surface on
	the Optical Pick-up Block
	with 7 mm aperture.
Frequency response	2 Hz – 20 kHz (±0.5 dB)
Wavelength	780 – 790 nm
Signal-to-noise ratio	More than 90 dB
Dynamic range	More than 90 dB
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
(Except for U.S. model)
Wavelength	600 nm
Output Level	–18 dBm

Tape player section

Recording system	4-track 2-channel stereo
Frequency response	60 – 13,000 Hz (±3 dB),
(DOLBY NR OFF)	using Sony TYPE I
	cassette
	60 – 14,000 Hz (±3 dB),
	using Sony TYPE II
	cassette
Wow and flutter	±0.15% W.Peak (IEC)
	0.1% W.RMS (NAB)
	±0.2% W.Peak (DIN)

42