Step 2: Setting the time
You must set the time before using the timer functions.
1 2,4 3,5
0 ) | ¹ |
¤ á¸
1 Press CLOCK TIMER SET.
The hour indication flashes.
2 Turn the jog dial to set the hour.
The clock is on a
3 Press ENTER/NEXT.
The minute indication flashes.
4 Turn the jog dial to set the minute.
5 Press ENTER/NEXT.
The clock starts working.
Tips
•If you’ve made a mistake, start over from step 1.
•Setting the time deactivates the demo mode . If you want to display the demo mode, press DISPLAY/DEMO when the power is off.
Note
When setting the time, set the wqualizer display to anything other than Spectrum analyzer pattern 3. (See “To change the equalizer display” on page 30.)
Step3: Presetting radiostations
You can preset up to 40 stations, 20 for FM, 10 for MW and 10 for SW. For North and South American, Australian and Thai models, you can preset up to 30 stations, 20 for FM and 10 for AM.
POWER 3,5 | 6 2 1 4 |
0 ) | ¹ |
| ¤ Ḡ|
1 Press TUNER/BAND repeatedly until the band you want appears in the display.
Every time you press this button, the band changes as follows:
North and South American, Australian and Thai models:
FM ÷AM Other models:
FM nMW nSW n
2 Press TUNING MODE repeatedly to select “AUTO”.
6